We purchased the DFQ-08NC fully automatic cutting machine from Dingfeng for the batch cutting of cemented carbide rods. The machine can cut 4 rods simultaneously in a single cycle, with cutting length accuracy stably controlled within ±0.05 mm.It has completely solved our previous problems of low efficiency and uneven end faces caused by manual cutting.**Model changeover is extremely convenient— switching between different diameters takes only 2 minutes.The investment in this equipment was fully recovered within 8 months.
The QDJ-25NC chamfering machine has solved the longstanding issue of inconsistent chamfering that has troubled us greatly.Previously, manual chamfering resulted in large angle deviations, which often led to rework in subsequent processes.This machine now automatically performs external circular chamfering, with angle deviation controlled within ±0.5°, delivering smooth and burr-free chamfered surfaces.We process over 1,000 rods per day, and the machine runs very stably.
We are a small and medium-sized cutting tool manufacturer. Previously, we cut cemented carbide rods using manual band saws, which resulted in low efficiency and high material waste.After purchasing the semi-automatic cutting machine from Dingfeng, a single unit can reliably process 800 rods per day, more than twice the efficiency of manual operation.In addition, the cut surfaces are smooth and flat, requiring almost no secondary grinding.The machine is reasonably priced, and we recovered our investment in just half a year.It is an ideal choice for businesses with limited budgets looking to improve efficiency.
Our factory specializes in small-batch, multi-specification orders*, and we need to switch between 3 to 5 different diameters of carbide rods every day.The Dingfeng semi-automatic cutting machine is extremely convenient for model changeover: simply loosen the fixture and replace the positioning block, and the whole process takes no more than 5 minutes.In addition, the machine adapts well to materials of varying hardness, cutting cleanly and smoothly from standard carbide to ultra-fine grain carbide.This level of flexibility is critically important for us.
